HUMAN PEDESTRIAN DISINFECTION TUNNEL (FIXED OR MOBILE) 
 
Disinfection tunnel for airports, sea ports, marinas, railway station, bus station, greenhouse, slaughterhouse, ovine, bovine farms, pedestrian, living and human hygiene, bacteria and viruses destruction and disinfection. 
 
The system is a tunnel or container in which all external visible areas of people and pedestrians can be disinfected with all the equipment (floor mat, hand disinfection, and fogging method) to purify microorganisms, hand and foot disinfection and whole body disinfection system. 
 
In human disinfection with fogging method, the person entering the tunnel disinfects his hand and goes to the hygiene mat, and the entrance sensors that detect the entrance when entering the tunnel automatically activate the fogging. 
In disinfection by means of fogging, disinfectant liquid from the nozzles turns into a cloud of fog, it destroys harmful microorganisms in all areas where the disinfectant comes into contact without wetting on the person. 
 
Optionally, it is possible to ensure that the person/ pedestrian can not leave the tunnel without hand or foot disinfection. 
 
Optionally, a self-closing mechanical door or electronic automatic door can be placed at the entrance and exit of the tunnel to prevent it from spreading around in the open spaces or to be affected by the external weather conditions in the least possible way. 
 
Tunnel dimensions; 
 
Standard Tunnel: Height: 2.37 mt, Width: 1.2 mt, Length: 2.0 mt. 
 
Standard Container: 2.5 mt, Width: 1.2 mt, Length: 2.0 mt. (Sandwich panel) 
TECHNICAL FEATURES OF THE TUNNEL: 
 
The outer part of the tunnel is covered with UV filtered polycarbonate.
Hand hygiene machine can be installed in the right or left area of the tunnel according to the entrance. (Optional)
In the systems installed in the interior area, the cabin is installed according to the area where the installation is drawn.
 
INSTALLATION FEATURES 
 
Automation board; It is mounted adjacent to the tunnel.
Starting fogging when the person / pedestrian is detected by the sensor at the entrance of the tunnel, the system sprays the disinfectant liquid in the form of a mist in order to disinfect the person or pedestrian. Thanks to the fogging method during spraying, there is no wetness in the person / pedestrian.
On the automation control panel; There is a digital timer for adjusting the disinfection working time, a digital temperature control device that controls the cabin temperature, and a digital temperature control device that controls the outside temperature. (Optional. Special for regions where winter automation is requested.)
 
Winter Automation; 
 
On the automation control panel; There will be a digital timer for adjusting the disinfection working time, a digital temperature control device that controls the cabin temperature, and a digital temperature control probe that controls the outside temperature.There will also be operating buttons with motor and pump protection circuits. In order to automatically prevent damage to mechanical parts (pump, motor etc.) working in the system in automation; If any of the water, disinfectant and antifreeze ends, the system will automatically switch to a stop state and will not perform disinfection while in this position. Summer and winter temperature settings will also be pre-loaded and separate operating modes will be determined. In order to prevent the anti-freeze and disinfectant liquid in the system to be consumed during the circuit change, there will be return lines to the relevant tank when the liquids in the system are not working. When the water is cut, pressure control sensor will be used to stop the system. Fully automatic cellonoid valve will be used at 70 bar pressure. User manual and system on-off features should be available on the LCD screen. On the automation control panel; There will be digital LCD screen timers, automatic automation software that controls the cabin temperature, digital temperature control device, digital temperature control probe for controlling the outdoor temperature, for setting the disinfection working time automatically. There will also be operating buttons with motor and pump protection circuits. Pump Motor Group will be on the pressure regulating regulator that determines the working pressure. In the pump motor group, ceramic piston, long life, high pressure pump will be used. It controls the level of disinfectant used for disinfection with the help of control devices in the system. In the event that no liquid can be taken from any of the water or disinfectant tanks, the system automatically switches to the warning state and does not disinfect while in this position. In this way, damage to the mechanical parts (pump, motor etc.) working in the system is automatically prevented.